patch-2.4.6 linux/drivers/usb/serial/cyberjack.c

• Lines: 521
• Date: Wed Jun 27 13:59:32 2001
• Orig file: v2.4.5/linux/drivers/usb/serial/cyberjack.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.5/linux/drivers/usb/serial/cyberjack.c linux/drivers/usb/serial/cyberjack.c
@@ -0,0 +1,520 @@
+/*
+ *  REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
+ *
+ *  Copyright (C) 2001  REINER SCT
+ *  Author: Matthias Bruestle
+ *
+ *  Contact: linux-usb@sii.li (see MAINTAINERS)
+ *
+ *  This program is largely derived from work by the linux-usb group
+ *  and associated source files.  Please see the usb/serial files for
+ *  individual credits and copyrights.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
+ *  patience.
+ *
+ *  In case of problems, please write to the contact e-mail address
+ *  mentioned above.
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+
+#ifdef CONFIG_USB_SERIAL_DEBUG
+	static int debug = 1;
+#else
+	static int debug;
+#endif
+
+#include "usb-serial.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_AUTHOR "Matthias Bruestle"
+#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
+
+
+#define CYBERJACK_VENDOR_ID	0x0C4B
+#define CYBERJACK_PRODUCT_ID	0x0100
+
+/* Function prototypes */
+static int cyberjack_startup (struct usb_serial *serial);
+static void cyberjack_shutdown (struct usb_serial *serial);
+static int  cyberjack_open (struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close (struct usb_serial_port *port, struct file *filp);
+static int cyberjack_write (struct usb_serial_port *port, int from_user,
+	const unsigned char *buf, int count);
+static void cyberjack_read_int_callback( struct urb *urb );
+static void cyberjack_read_bulk_callback (struct urb *urb);
+static void cyberjack_write_bulk_callback (struct urb *urb);
+
+static __devinitdata struct usb_device_id id_table [] = {
+	{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
+	{ }			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, id_table);
+
+struct usb_serial_device_type cyberjack_device = {
+	name:			"Reiner SCT Cyberjack USB card reader",
+	id_table:		id_table,
+	needs_interrupt_in:	MUST_HAVE,
+	needs_bulk_in:		MUST_HAVE,
+	needs_bulk_out:		MUST_HAVE,
+	num_interrupt_in:	1,
+	num_bulk_in:		1,
+	num_bulk_out:		1,
+	num_ports:		1,
+	startup:		cyberjack_startup,
+	shutdown:		cyberjack_shutdown,
+	open:			cyberjack_open,
+	close:			cyberjack_close,
+	write:			cyberjack_write,
+	read_int_callback:	cyberjack_read_int_callback,
+	read_bulk_callback:	cyberjack_read_bulk_callback,
+	write_bulk_callback:	cyberjack_write_bulk_callback,
+};
+
+struct cyberjack_private {
+	short	rdtodo;		/* Bytes still to read */
+	unsigned char	wrbuf[5*64];	/* Buffer for collecting data to write */
+	short	wrfilled;	/* Overall data size we already got */
+	short	wrsent;		/* Data akready sent */
+};
+
+/* do some startup allocations not currently performed by usb_serial_probe() */
+static int cyberjack_startup (struct usb_serial *serial)
+{
+	struct cyberjack_private *priv;
+
+	dbg (__FUNCTION__);
+
+	/* allocate the private data structure */
+	serial->port->private = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
+	if (!serial->port->private)
+		return (-1); /* error */
+
+	/* set initial values */
+	priv = (struct cyberjack_private *)serial->port->private;
+	priv->rdtodo = 0;
+	priv->wrfilled = 0;
+	priv->wrsent = 0;
+
+	init_waitqueue_head(&serial->port->write_wait);
+
+	return( 0 );
+}
+
+static void cyberjack_shutdown (struct usb_serial *serial)
+{
+	int i;
+	
+	dbg (__FUNCTION__);
+
+	/* stop reads and writes on all ports */
+	for (i=0; i < serial->num_ports; ++i) {
+		while (serial->port[i].open_count > 0) {
+			cyberjack_close (&serial->port[i], NULL);
+		}
+		/* My special items, the standard routines free my urbs */
+		if (serial->port[i].private)
+			kfree(serial->port[i].private);
+	}
+}
+	
+static int  cyberjack_open (struct usb_serial_port *port, struct file *filp)
+{
+	struct cyberjack_private *priv;
+	int result = 0;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return -ENODEV;
+
+	MOD_INC_USE_COUNT;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	down (&port->sem);
+
+	++port->open_count;
+
+	if (!port->active) {
+		port->active = 1;
+		/* force low_latency on so that our tty_push actually forces
+		 * the data through, otherwise it is scheduled, and with high
+		 * data rates (like with OHCI) data can get lost.
+		 */
+		port->tty->low_latency = 1;
+
+		priv = (struct cyberjack_private *)port->private;
+		priv->rdtodo = 0;
+		priv->wrfilled = 0;
+		priv->wrsent = 0;
+
+		/* shutdown any bulk reads that might be going on */
+		usb_unlink_urb (port->write_urb);
+		usb_unlink_urb (port->read_urb);
+		usb_unlink_urb (port->interrupt_in_urb);
+
+		port->interrupt_in_urb->dev = port->serial->dev;
+		result = usb_submit_urb(port->interrupt_in_urb);
+		if (result)
+			err(" usb_submit_urb(read int) failed");
+		dbg(__FUNCTION__ " - usb_submit_urb(int urb)");
+	}
+
+	up (&port->sem);
+
+	return result;
+}
+
+static void cyberjack_close (struct usb_serial_port *port, struct file *filp)
+{
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	down (&port->sem);
+
+	--port->open_count;
+
+	if (port->open_count <= 0) {
+		/* shutdown any bulk reads that might be going on */
+		usb_unlink_urb (port->write_urb);
+		usb_unlink_urb (port->read_urb);
+		usb_unlink_urb (port->interrupt_in_urb);
+
+		port->active = 0;
+		port->open_count = 0;
+	}
+
+	up (&port->sem);
+	MOD_DEC_USE_COUNT;
+}
+
+static int cyberjack_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
+{
+	struct usb_serial *serial = port->serial;
+	struct cyberjack_private *priv = (struct cyberjack_private *)port->private;
+	int result;
+	int wrexpected;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+	dbg(__FUNCTION__ " - from_user %d", from_user);
+
+	if (count == 0) {
+		dbg(__FUNCTION__ " - write request of 0 bytes");
+		return (0);
+	}
+
+	if (port->write_urb->status == -EINPROGRESS) {
+		dbg (__FUNCTION__ " - already writing");
+		return (0);
+	}
+
+	down (&port->sem);
+
+	if( (count+priv->wrfilled)>sizeof(priv->wrbuf) ) {
+		/* To much data  for buffer. Reset buffer. */
+		priv->wrfilled=0;
+		return (0);
+	}
+
+	/* Copy data */
+	if (from_user) {
+		copy_from_user(priv->wrbuf+priv->wrfilled, buf, count);
+	} else {
+		memcpy (priv->wrbuf+priv->wrfilled, buf, count);
+	}  
+	usb_serial_debug_data (__FILE__, __FUNCTION__, count,
+		priv->wrbuf+priv->wrfilled);
+	priv->wrfilled += count;
+
+	if( priv->wrfilled >= 3 ) {
+		wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
+		dbg(__FUNCTION__ " - expected data: %d", wrexpected);
+	} else {
+		wrexpected = sizeof(priv->wrbuf);
+	}
+
+	if( priv->wrfilled >= wrexpected ) {
+		/* We have enough data to begin transmission */
+		int length;
+
+		dbg(__FUNCTION__ " - transmitting data (frame 1)");
+		length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected;
+
+		memcpy (port->write_urb->transfer_buffer, priv->wrbuf, length );
+		priv->wrsent=length;
+
+		/* set up our urb */
+		FILL_BULK_URB(port->write_urb, serial->dev, 
+			      usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
+			      port->write_urb->transfer_buffer, length,
+			      ((serial->type->write_bulk_callback) ? 
+			       serial->type->write_bulk_callback : 
+			       cyberjack_write_bulk_callback), 
+			      port);
+
+		/* send the data out the bulk port */
+		result = usb_submit_urb(port->write_urb);
+		if (result) {
+			err(__FUNCTION__ " - failed submitting write urb, error %d", result);
+			/* Throw away data. No better idea what to do with it. */
+			priv->wrfilled=0;
+			priv->wrsent=0;
+			up (&port->sem);
+			return 0;
+		}
+
+		dbg(__FUNCTION__ " - priv->wrsent=%d",priv->wrsent);
+		dbg(__FUNCTION__ " - priv->wrfilled=%d",priv->wrfilled);
+
+		if( priv->wrsent>=priv->wrfilled ) {
+			dbg(__FUNCTION__ " - buffer cleaned");
+			memset( priv->wrbuf, 0, sizeof(priv->wrbuf) );
+			priv->wrfilled=0;
+			priv->wrsent=0;
+		}
+	}
+
+	up (&port->sem);
+	return (count);
+} 
+
+static void cyberjack_read_int_callback( struct urb *urb )
+{
+	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct cyberjack_private *priv = (struct cyberjack_private *)port->private;
+	struct usb_serial *serial;
+	unsigned char *data = urb->transfer_buffer;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	/* the urb might have been killed. */
+	if (urb->status)
+		return;
+
+	if (port_paranoia_check (port, "cyberjack_read_interrupt")) return;
+
+	serial = port->serial;
+	if (serial_paranoia_check (serial, "cyberjack_read_interrupt")) return;
+
+	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
+
+	/* React only to interrupts signaling a bulk_in transfer */
+	if( (urb->actual_length==4) && (data[0]==0x01) ) {
+		short old_rdtodo = priv->rdtodo;
+		int result;
+
+		/* This is a announcement of comming bulk_ins. */
+		unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3;
+
+		if( (size>259) || (size==0) ) {
+			dbg( "Bad announced bulk_in data length: %d", size );
+			/* Dunno what is most reliable to do here. */
+			/* return; */
+		}
+
+		if( (old_rdtodo+size)<(old_rdtodo) ) {
+			dbg( "To many bulk_in urbs to do." );
+			return;
+		}
+
+		/* "+=" is probably more fault tollerant than "=" */
+		priv->rdtodo += size;
+
+		dbg(__FUNCTION__ " - rdtodo: %d", priv->rdtodo);
+
+		if( !old_rdtodo ) {
+			port->read_urb->dev = port->serial->dev;
+			result = usb_submit_urb(port->read_urb);
+			if( result )
+				err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
+			dbg(__FUNCTION__ " - usb_submit_urb(read urb)");
+		}
+	}
+}
+
+static void cyberjack_read_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct cyberjack_private *priv = (struct cyberjack_private *)port->private;
+	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int i;
+	int result;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+	
+	if (!serial) {
+		dbg(__FUNCTION__ " - bad serial pointer, exiting");
+		return;
+	}
+
+	if (urb->status) {
+		usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
+		dbg(__FUNCTION__ " - nonzero read bulk status received: %d", urb->status);
+		return;
+	}
+
+	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
+
+	tty = port->tty;
+	if (urb->actual_length) {
+		for (i = 0; i < urb->actual_length ; ++i) {
+			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
+			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				tty_flip_buffer_push(tty);
+			}
+			/* this doesn't actually push the data through unless tty->low_latency is set */
+			tty_insert_flip_char(tty, data[i], 0);
+		}
+	  	tty_flip_buffer_push(tty);
+	}
+
+	/* Reduce urbs to do by one. */
+	priv->rdtodo-=urb->actual_length;
+	/* Just to be sure */
+	if( priv->rdtodo<0 ) priv->rdtodo=0;
+
+	dbg(__FUNCTION__ " - rdtodo: %d", priv->rdtodo);
+
+	/* Continue to read if we have still urbs to do. */
+	if( priv->rdtodo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/ ) {
+		port->read_urb->dev = port->serial->dev;
+		result = usb_submit_urb(port->read_urb);
+		if (result)
+			err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
+		dbg(__FUNCTION__ " - usb_submit_urb(read urb)");
+	}
+}
+
+static void cyberjack_write_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct cyberjack_private *priv = (struct cyberjack_private *)port->private;
+	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+	
+	if (!serial) {
+		dbg(__FUNCTION__ " - bad serial pointer, exiting");
+		return;
+	}
+
+	if (urb->status) {
+		dbg(__FUNCTION__ " - nonzero write bulk status received: %d", urb->status);
+		return;
+	}
+
+	/* only do something if we have more data to send */
+	if( priv->wrfilled ) {
+		int length, blksize, result;
+
+		if (port->write_urb->status == -EINPROGRESS) {
+			dbg (__FUNCTION__ " - already writing");
+			return;
+		}
+
+		down (&port->sem);
+
+		dbg(__FUNCTION__ " - transmitting data (frame n)");
+
+		length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
+			port->bulk_out_size : (priv->wrfilled - priv->wrsent);
+
+		memcpy (port->write_urb->transfer_buffer, priv->wrbuf + priv->wrsent,
+			length );
+		priv->wrsent+=length;
+
+		/* set up our urb */
+		FILL_BULK_URB(port->write_urb, serial->dev, 
+			      usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
+			      port->write_urb->transfer_buffer, length,
+			      ((serial->type->write_bulk_callback) ? 
+			       serial->type->write_bulk_callback : 
+			       cyberjack_write_bulk_callback), 
+			      port);
+
+		/* send the data out the bulk port */
+		result = usb_submit_urb(port->write_urb);
+		if (result) {
+			err(__FUNCTION__ " - failed submitting write urb, error %d", result);
+			/* Throw away data. No better idea what to do with it. */
+			priv->wrfilled=0;
+			priv->wrsent=0;
+			up (&port->sem);
+			queue_task(&port->tqueue, &tq_immediate);
+			mark_bh(IMMEDIATE_BH);
+			return;
+		}
+
+		dbg(__FUNCTION__ " - priv->wrsent=%d",priv->wrsent);
+		dbg(__FUNCTION__ " - priv->wrfilled=%d",priv->wrfilled);
+
+		blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
+
+		if( (priv->wrsent>=priv->wrfilled) || (priv->wrsent>=blksize) ) {
+			dbg(__FUNCTION__ " - buffer cleaned");
+			memset( priv->wrbuf, 0, sizeof(priv->wrbuf) );
+			priv->wrfilled=0;
+			priv->wrsent=0;
+		}
+
+		up (&port->sem);
+		queue_task(&port->tqueue, &tq_immediate);
+		mark_bh(IMMEDIATE_BH);
+		return;
+	}
+
+	queue_task(&port->tqueue, &tq_immediate);
+	mark_bh(IMMEDIATE_BH);
+	
+	return;
+}
+
+static int __init cyberjack_init (void)
+{
+	usb_serial_register (&cyberjack_device);
+
+	info(DRIVER_VERSION " " DRIVER_AUTHOR);
+	info(DRIVER_DESC);
+
+	return 0;
+}
+
+static void __exit cyberjack_exit (void)
+{
+	usb_serial_deregister (&cyberjack_device);
+}
+
+module_init(cyberjack_init);
+module_exit(cyberjack_exit);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+
+MODULE_PARM(debug, "i");
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+