GIT-ADD(1)

NAME
git-add - Add file contents to the index

SYNOPSIS

git add [--verbose | -v] [--dry-run | -n] [--force | -f] [--interactive | -i] [--patch | -p]
	[--edit | -e] [--[no-]all | -A | --[no-]ignore-removal | [--update | -u]] [--sparse]
	[--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing] [--renormalize]
	[--chmod=(+|-)x] [--pathspec-from-file=<file> [--pathspec-file-nul]]
	[--] [<pathspec>...]

DESCRIPTION

Add contents of new or changed files to the index. The "index" (also known as the "staging area") is what you use to prepare the contents of the next commit.

When you run git commit without any other arguments, it will only commit staged changes. For example, if you’ve edited file.c and want to commit your changes to that file, you can run:

    git add file.c
    git commit

You can also add only part of your changes to a file with git add -p.

This command can be performed multiple times before a commit. It only adds the content of the specified file(s) at the time the add command is run; if you want subsequent changes included in the next commit, then you must run git add again to add the new content to the index.

The git status command can be used to obtain a summary of which files have changes that are staged for the next commit.

The git add command will not add ignored files by default. You can use the --force option to add ignored files. If you specify the exact filename of an ignored file, git add will fail with a list of ignored files. Otherwise it will silently ignore the file.

Please see git-commit(1) for alternative ways to add content to a commit.

OPTIONS

<pathspec>...
    Files to add content from. Fileglobs (e.g. *.c) can be given to add all matching files. Also a leading directory name (e.g. dir to add dir/file1 and dir/file2) can be given to update the index to match the current state of the directory as a whole (e.g. specifying dir will record not just a file dir/file1 modified in the working tree, a file dir/file2 added to the working tree, but also a file dir/file3 removed from the working tree). Note that older versions of Git used to ignore removed files; use --no-all option if you want to add modified or new files but ignore removed ones.

    For more details about the <pathspec> syntax, see the pathspec entry in gitglossary(7).

-n, --dry-run
    Don’t actually add the file(s), just show if they exist and/or will be ignored.

-v, --verbose
    Be verbose.

-f, --force
    Allow adding otherwise ignored files. The option is also used when submodule.<name>.ignore=all is set, but you want to stage an update of the submodule. The path to the submodule must be explicitly specified.

--sparse
    Allow updating index entries outside of the sparse-checkout cone. Normally, git add refuses to update index entries whose paths do not fit within the sparse-checkout cone, since those files might be removed from the working tree without warning. See git-sparse-checkout(1) for more details.

-i, --interactive
    Add modified contents in the working tree interactively to the index. Optional path arguments may be supplied to limit operation to a subset of the working tree. See “Interactive mode” for details.

-p, --patch
    Interactively choose hunks of patch between the index and the work tree and add them to the index. This gives the user a chance to review the difference before adding modified contents to the index.

    This effectively runs add --interactive, but bypasses the initial command menu and directly jumps to the patch subcommand. See “Interactive mode” for details.

-U<n>, --unified=<n>
    Generate diffs with <n> lines of context. The number of context lines defaults to diff.context or 3 if the configuration variable is unset. (-U without <n> is silently accepted as a synonym for -p due to a historical accident).

--inter-hunk-context=<n>
    Show the context between diff hunks, up to the specified <number> of lines, thereby fusing hunks that are close to each other. Defaults to diff.interHunkContext or 0 if the config option is unset.

-e, --edit
    Open the diff vs. the index in an editor and let the user edit it. After the editor was closed, adjust the hunk headers and apply the patch to the index.

    The intent of this option is to pick and choose lines of the patch to apply, or even to modify the contents of lines to be staged. This can be quicker and more flexible than using the interactive hunk selector. However, it is easy to confuse oneself and create a patch that does not apply to the index. See EDITING PATCHES below.

-u, --update
    Update the index just where it already has an entry matching <pathspec>. This removes as well as modifies index entries to match the working tree, but adds no new files.

    If no <pathspec> is given when -u option is used, all tracked files in the entire working tree are updated (old versions of Git used to limit the update to the current directory and its subdirectories).

-A, --all, --no-ignore-removal
    Update the index not only where the working tree has a file matching <pathspec> but also where the index already has an entry. This adds, modifies, and removes index entries to match the working tree.

    If no <pathspec> is given when -A option is used, all files in the entire working tree are updated (old versions of Git used to limit the update to the current directory and its subdirectories).

--no-all, --ignore-removal
    Update the index by adding new files that are unknown to the index and files modified in the working tree, but ignore files that have been removed from the working tree. This option is a no-op when no <pathspec> is used.

    This option is primarily to help users who are used to older versions of Git, whose git add <pathspec>... was a synonym for git add --no-all <pathspec>..., i.e. ignored removed files.

-N, --intent-to-add
    Record only the fact that the path will be added later. An entry for the path is placed in the index with no content. This is useful for, among other things, showing the unstaged content of such files with git diff and committing them with git commit -a.

--refresh
    Don’t add the file(s), but only refresh their stat() information in the index.

--ignore-errors
    If some files could not be added because of errors indexing them, do not abort the operation, but continue adding the others. The command shall still exit with non-zero status. The configuration variable add.ignoreErrors can be set to true to make this the default behaviour.

--ignore-missing
    This option can only be used together with --dry-run. By using this option the user can check if any of the given files would be ignored, no matter if they are already present in the work tree or not.

--no-warn-embedded-repo
    By default, git add will warn when adding an embedded repository to the index without using git submodule add to create an entry in .gitmodules. This option will suppress the warning (e.g., if you are manually performing operations on submodules).

--renormalize
    Apply the "clean" process freshly to all tracked files to forcibly add them again to the index. This is useful after changing core.autocrlf configuration or the text attribute in order to correct files added with wrong CRLF/LF line endings. This option implies -u. Lone CR characters are untouched, thus while a CRLF cleans to LF, a CRCRLF sequence is only partially cleaned to CRLF.

--chmod=(+|-)x
    Override the executable bit of the added files. The executable bit is only changed in the index, the files on disk are left unchanged.

--pathspec-from-file=<file>
    Pathspec is passed in <file> instead of commandline args. If <file> is exactly - then standard input is used. Pathspec elements are separated by LF or CR/LF. Pathspec elements can be quoted as explained for the configuration variable core.quotePath (see git-config(1)). See also --pathspec-file-nul and global --literal-pathspecs.

--pathspec-file-nul
    Only meaningful with --pathspec-from-file. Pathspec elements are separated with NUL character and all other characters are taken literally (including newlines and quotes).

--
    This option can be used to separate command-line options from the list of files, (useful when filenames might be mistaken for command-line options).

EXAMPLES

    • Adds content from all *.txt files under Documentation directory and its subdirectories:

        $ git add Documentation/\*.txt

    Note that the asterisk * is quoted from the shell in this example; this lets the command include the files from subdirectories of Documentation/ directory.

    • Considers adding content from all git-*.sh scripts:

        $ git add git-*.sh

    Because this example lets the shell expand the asterisk (i.e. you are listing the files explicitly), it does not consider subdir/git-foo.sh.

INTERACTIVE MODE

When the command enters the interactive mode, it shows the output of the status subcommand, and then goes into its interactive command loop.

The command loop shows the list of subcommands available, and gives a prompt "What now> ". In general, when the prompt ends with a single >, you can pick only one of the choices given and type return, like this:

        *** Commands ***
          1: status       2: update       3: revert       4: add untracked
          5: patch        6: diff         7: quit         8: help
        What now> 1

You also could say s or sta or status above as long as the choice is unique.

The main command loop has 6 subcommands (plus help and quit).

status
    This shows the change between HEAD and index (i.e. what will be committed if you say git commit), and between index and working tree files (i.e. what you could stage further before git commit using git add) for each path. A sample output looks like this:

                      staged     unstaged path
             1:       binary      nothing foo.png
             2:     +403/-35        +1/-1 add-interactive.c

    It shows that foo.png has differences from HEAD (but that is binary so line count cannot be shown) and there is no difference between indexed copy and the working tree version (if the working tree version were also different, binary would have been shown in place of nothing). The other file, add-interactive.c, has 403 lines added and 35 lines deleted if you commit what is in the index, but working tree file has further modifications (one addition and one deletion).

update
    This shows the status information and issues an "Update>>" prompt. When the prompt ends with double >>, you can make more than one selection, concatenated with whitespace or comma. Also you can say ranges. E.g. "2-5 7,9" to choose 2,3,4,5,7,9 from the list. If the second number in a range is omitted, all remaining patches are taken. E.g. "7-" to choose 7,8,9 from the list. You can say * to choose everything.

    What you chose are then highlighted with *, like this:

                   staged     unstaged path
          1:       binary      nothing foo.png
        * 2:     +403/-35        +1/-1 add-interactive.c

    To remove selection, prefix the input with - like this:

        Update>> -2

    After making the selection, answer with an empty line to stage the contents of working tree files for selected paths in the index.

revert
    This has a very similar UI to update, and the staged information for selected paths are reverted to that of the HEAD version. Reverting new paths makes them untracked.

add untracked
    This has a very similar UI to update and revert, and lets you add untracked paths to the index.

patch
    This lets you choose one path out of a status like selection. After choosing the path, it presents the diff between the index and the working tree file and asks you if you want to stage the change of each hunk. You can select one of the following options and type return:

        y - stage this hunk
        n - do not stage this hunk
        q - quit; do not stage this hunk or any of the remaining ones
        a - stage this hunk and all later hunks in the file
        d - do not stage this hunk or any of the later hunks in the file
        g - select a hunk to go to
        / - search for a hunk matching the given regex
        j - go to the next undecided hunk, roll over at the bottom
        J - go to the next hunk, roll over at the bottom
        k - go to the previous undecided hunk, roll over at the top
        K - go to the previous hunk, roll over at the top
        s - split the current hunk into smaller hunks
        e - manually edit the current hunk
        p - print the current hunk
        P - print the current hunk using the pager
        ? - print help

    After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated with the selected hunks.

    You can omit having to type return here, by setting the configuration variable interactive.singleKey to true.

diff
    This lets you review what will be committed (i.e. between HEAD and index).

EDITING PATCHES

Invoking git add -e or selecting e from the interactive hunk selector will open a patch in your editor; after the editor exits, the result is applied to the index. You are free to make arbitrary changes to the patch, but note that some changes may have confusing results, or even result in a patch that cannot be applied. If you want to abort the operation entirely (i.e., stage nothing new in the index), simply delete all lines of the patch. The list below describes some common things you may see in a patch, and which editing operations make sense on them.

added content
    Added content is represented by lines beginning with "+". You can prevent staging any addition lines by deleting them.

removed content
    Removed content is represented by lines beginning with "-". You can prevent staging their removal by converting the "-" to a " " (space).

modified content
    Modified content is represented by "-" lines (removing the old content) followed by "+" lines (adding the replacement content). You can prevent staging the modification by converting "-" lines to " ", and removing "+" lines. Beware that modifying only half of the pair is likely to introduce confusing changes to the index.

There are also more complex operations that can be performed. But beware that because the patch is applied only to the index and not the working tree, the working tree will appear to "undo" the change in the index. For example, introducing a new line into the index that is in neither the HEAD nor the working tree will stage the new line for commit, but the line will appear to be reverted in the working tree.

Avoid using these constructs, or do so with extreme caution.

removing untouched content
    Content which does not differ between the index and working tree may be shown on context lines, beginning with a " " (space). You can stage context lines for removal by converting the space to a "-". The resulting working tree file will appear to re-add the content.

modifying existing content
    One can also modify context lines by staging them for removal (by converting " " to "-") and adding a "+" line with the new content. Similarly, one can modify "+" lines for existing additions or modifications. In all cases, the new modification will appear reverted in the working tree.

new content
    You may also add new content that does not exist in the patch; simply add new lines, each starting with "+". The addition will appear reverted in the working tree.

There are also several operations which should be avoided entirely, as they will make the patch impossible to apply:

    • adding context (" ") or removal ("-") lines

    • deleting context or removal lines

    • modifying the contents of context or removal lines

CONFIGURATION

Everything below this line in this section is selectively included from the git-config(1) documentation. The content is the same as what’s found there:

add.ignoreErrors, add.ignore-errors (deprecated)
    Tells git add to continue adding files when some files cannot be added due to indexing errors. Equivalent to the --ignore-errors option. add.ignore-errors is deprecated, as it does not follow the usual naming convention for configuration variables.

SEE ALSO

git-status(1) git-rm(1) git-reset(1) git-mv(1) git-commit(1) git-update-index(1)

GIT

Part of the git(1) suite