Safari and Opera for Mac OS X
With Manual Dial-Up.
Note:
The following configuration should be executed only by an expert.
We recommend to use the browser Firefox
for other users.
For the configuration you open the dialog Network
in the System Preferences.
- (1) At Show you select Network
Status.
You need an LAN network component, e.g. local network, hub, switch, router,
DSL modem, cable modem, AirPort (WLAN).
Note:
At first if such a component isn't available, this has to be created.
If this isn't possible, please use another browser (Firefox,
Internet Explorer).
- (2) Select a LAN network component.
- (3) Click on Configure....
|
|
- (4) Select tab TCP/IP.
Note:
At first if the lock symbol is closed, you must open the lock. You need
administrator rights for the configuration.
- (5) Activate Configure IPv4
E.g. with Manually and give your computer an IP
Address and a Subnet Mask.
|
|
- (6) Select tab Proxies.
- (7) Select the proxies FTP
as well as HTTP after each other and
enter respectively for the proxy server (8):127.0.0.1:8080
Note:
If entries are already available here then you transfer these in the
WebAssistant
from Surf Sets/(HTTP-Protocol,
FTP-Protocol).
|
|
You duplicate the configuration of your dialing connection at the best
one. (For this at Show select the Network Port
Configurations.) When connecting to internet you can select,
whether you would like to surf with the WebAssistant
or without this.
|
|
- (9) At Show select the Dial-up
network component.
- (10) Select tab Proxies.
- (11) Select the proxies FTP
as well as HTTP after each other and
enter respectively for the proxy server (12): 127.0.0.1:80800
Note:
If entries are already available here then you transfer these in the
WebAssistant
from Surf Sets/(HTTP-Protocol,
FTP-Protocol).
- (13) Click on: Apply Now.
|
|
Please, check now the installation with an offline-
and an online-test.