patch-2.4.22 linux-2.4.22/arch/sh64/kernel/irq_intc.c

• Lines: 270
• Date: 2003-08-25 04:44:40.000000000 -0700
• Orig file: linux-2.4.21/arch/sh64/kernel/irq_intc.c
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/arch/sh64/kernel/irq_intc.c linux-2.4.22/arch/sh64/kernel/irq_intc.c
@@ -0,0 +1,269 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq_intc.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * Interrupt Controller support for SH5 INTC.
+ * Per-interrupt selective. IRLM=0 (Fixed priority) is not
+ * supported being useless without a cascaded interrupt
+ * controller.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+
+#include <asm/hardware.h>
+#include <asm/platform.h>
+#include <asm/bitops.h>		/* this includes also <asm/registers.h */
+				/* which is required to remap register */
+				/* names used into __asm__ blocks...   */
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Maybe the generic Peripheral block could move to a more
+ * generic include file. INTC Block will be defined here
+ * and only here to make INTC self-contained in a single
+ * file.
+ */
+#define	INTC_BLOCK_OFFSET	0x01000000
+
+/* Base */
+#define INTC_BASE		PHYS_PERIPHERAL_BLOCK + \
+				INTC_BLOCK_OFFSET
+
+/* Address */
+#define INTC_ICR_SET		(intc_virt + 0x0)
+#define INTC_ICR_CLEAR		(intc_virt + 0x8)
+#define INTC_INTPRI_0		(intc_virt + 0x10)
+#define INTC_INTSRC_0		(intc_virt + 0x50)
+#define INTC_INTSRC_1		(intc_virt + 0x58)
+#define INTC_INTREQ_0		(intc_virt + 0x60)
+#define INTC_INTREQ_1		(intc_virt + 0x68)
+#define INTC_INTENB_0		(intc_virt + 0x70)
+#define INTC_INTENB_1		(intc_virt + 0x78)
+#define INTC_INTDSB_0		(intc_virt + 0x80)
+#define INTC_INTDSB_1		(intc_virt + 0x88)
+
+#define INTC_ICR_IRLM		0x1
+#define	INTC_INTPRI_PREGS	8		/* 8 Priority Registers */
+#define	INTC_INTPRI_PPREG	8		/* 8 Priorities per Register */
+
+
+/*
+ * Mapper between the vector ordinal and the IRQ number
+ * passed to kernel/device drivers.
+ */
+int intc_evt_to_irq[(0xE20/0x20)+1] = {
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x000 - 0x0E0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x100 - 0x1E0 */
+	 0,  0,  0,  0,  0,  1,  0,  0,	/* 0x200 - 0x2E0 */
+	 2,  0,  0,  3,  0,  0,  0, -1,	/* 0x300 - 0x3E0 */
+	32, 33, 34, 35, 36, 37, 38, -1,	/* 0x400 - 0x4E0 */
+	-1, -1, -1, 63, -1, -1, -1, -1,	/* 0x500 - 0x5E0 */
+	-1, -1, 18, 19, 20, 21, 22, -1,	/* 0x600 - 0x6E0 */
+	39, 40, 41, 42, -1, -1, -1, -1,	/* 0x700 - 0x7E0 */
+	 4,  5,  6,  7, -1, -1, -1, -1,	/* 0x800 - 0x8E0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x900 - 0x9E0 */
+	12, 13, 14, 15, 16, 17, -1, -1,	/* 0xA00 - 0xAE0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xB00 - 0xBE0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xC00 - 0xCE0 */
+	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xD00 - 0xDE0 */
+	-1, -1				/* 0xE00 - 0xE20 */
+};
+
+/*
+ * Opposite mapper.
+ */
+static int IRQ_to_vectorN[NR_INTC_IRQS] = {
+	0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /*  0- 7 */
+	  -1,   -1,   -1,   -1, 0x50, 0x51, 0x52, 0x53,	/*  8-15 */
+	0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36,   -1, /* 16-23 */
+	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 24-31 */
+	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38,	/* 32-39 */
+        0x39, 0x3A, 0x3B,   -1,   -1,   -1,   -1,   -1, /* 40-47 */
+	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 48-55 */
+	  -1,   -1,   -1,   -1,   -1,   -1,   -1, 0x2B, /* 56-63 */
+	  
+};
+
+static unsigned long intc_virt;
+
+static unsigned int startup_intc_irq(unsigned int irq);
+static void shutdown_intc_irq(unsigned int irq);
+static void enable_intc_irq(unsigned int irq);
+static void disable_intc_irq(unsigned int irq);
+static void mask_and_ack_intc(unsigned int);
+static void end_intc_irq(unsigned int irq);
+
+static struct hw_interrupt_type intc_irq_type = {
+	"INTC",
+	startup_intc_irq,
+	shutdown_intc_irq,
+	enable_intc_irq,
+	disable_intc_irq,
+	mask_and_ack_intc,
+	end_intc_irq
+};
+
+static int irlm;		/* IRL mode */
+
+static unsigned int startup_intc_irq(unsigned int irq)
+{ 
+	enable_intc_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_intc_irq(unsigned int irq)
+{
+	disable_intc_irq(irq);
+}
+
+static void enable_intc_irq(unsigned int irq)
+{
+	unsigned long reg;
+	unsigned long bitmask;
+
+	if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
+		printk("Trying to use straight IRL0-3 with an encoding platform.\n");
+
+	if (irq < 32) {
+		reg = INTC_INTENB_0;
+		bitmask = 1 << irq;
+	} else {
+		reg = INTC_INTENB_1;
+		bitmask = 1 << (irq - 32);
+	}
+
+	ctrl_outl(bitmask, reg);
+}
+
+static void disable_intc_irq(unsigned int irq)
+{
+	unsigned long reg;
+	unsigned long bitmask;
+
+	if (irq < 32) {
+		reg = INTC_INTDSB_0;
+		bitmask = 1 << irq;
+	} else {
+		reg = INTC_INTDSB_1;
+		bitmask = 1 << (irq - 32);
+	}
+
+	ctrl_outl(bitmask, reg);
+}
+
+static void mask_and_ack_intc(unsigned int irq)
+{
+	disable_intc_irq(irq);
+}
+
+static void end_intc_irq(unsigned int irq)
+{
+	enable_intc_irq(irq);	
+}
+
+/* For future use, if we ever support IRLM=0) */
+void make_intc_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &intc_irq_type;
+	disable_intc_irq(irq);
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int intc_irq_describe(char* p, int irq)
+{
+	if (irq < NR_INTC_IRQS)
+		return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
+	else
+		return 0;
+}
+#endif
+
+void __init init_IRQ(void)
+{
+        unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+	unsigned long reg;
+	unsigned long data;
+	int i;
+
+	intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+	if (!intc_virt) {
+		panic("Unable to remap INTC\n");
+	}
+
+
+	/* Set default: per-line enable/disable, priority driven ack/eoi */
+	for (i = 0; i < NR_INTC_IRQS; i++) {
+		if (platform_int_priority[i] != NO_PRIORITY) {
+			irq_desc[i].handler = &intc_irq_type;
+		}
+	}
+
+
+	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
+	ctrl_outl(-1, INTC_INTDSB_0);
+	ctrl_outl(-1, INTC_INTDSB_1);
+
+	for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
+		ctrl_outl( NO_PRIORITY, reg);
+		
+
+	/* Set IRLM */
+	/* If all the priorities are set to 'no priority', then
+	 * assume we are using encoded mode.
+	 */
+	irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
+		platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
+
+	if (irlm == NO_PRIORITY) {
+		/* IRLM = 0 */
+		reg = INTC_ICR_CLEAR;
+		i = IRQ_INTA;
+		printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+	} else {
+		/* IRLM = 1 */
+		reg = INTC_ICR_SET;
+		i = IRQ_IRL0;
+	}
+	ctrl_outl(INTC_ICR_IRLM, reg);
+
+	/* Set interrupt priorities according to platform description */
+	for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+		data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
+		if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+			/* Upon the 7th, set Priority Register */
+			ctrl_outl(data, reg);
+			data = 0;
+			reg += 8;
+		}
+	}
+
+#ifdef CONFIG_SH_CAYMAN
+	extern void init_cayman_irq(void);
+
+	init_cayman_irq();
+#endif
+
+	/*
+	 * And now let interrupts come in.
+	 * sti() is not enough, we need to
+	 * lower priority, too.
+	 */
+        __asm__ __volatile__("getcon    " __c0 ", %0\n\t"
+                             "and       %0, %1, %0\n\t"
+                             "putcon    %0, " __c0 "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+}