patch-2.4.22 linux-2.4.22/arch/mips64/kernel/gdb-low.S

Next file: linux-2.4.22/arch/mips64/kernel/gdb-stub.c
Previous file: linux-2.4.22/arch/mips64/kernel/entry.S
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips64/kernel/gdb-low.S linux-2.4.22/arch/mips64/kernel/gdb-low.S
@@ -0,0 +1,357 @@
+/*
+ * gdb-low.S contains the low-level trap handler for the GDB stub.
+ *
+ * Copyright (C) 1995 Andreas Busse
+ */
+#include <linux/config.h>
+#include <linux/sys.h>
+
+#include <asm/asm.h>
+#include <asm/errno.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/gdb-stub.h>
+
+/*
+ * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
+ * part is used to store registers and passed to exception handler.
+ * The upper part is reserved for "call func" feature where gdb client
+ * saves some of the regs, setups call frame and passes args.
+ *
+ * A trace shows about 200 bytes are used to store about half of all regs.
+ * The rest should be big enough for frame setup and passing args.
+ */
+
+/*
+ * The low level trap handler
+ */
+		.align 	5
+		NESTED(trap_low, GDB_FR_SIZE, sp)
+ 		.set	noat
+		.set 	noreorder
+
+		mfc0	k0,CP0_STATUS
+		sll	k0,3     		/* extract cu0 bit */
+		bltz	k0,1f
+		move	k1,sp
+
+		/*
+		 * Called from user mode, go somewhere else.
+		 */
+		lui	k1,%hi(saved_vectors)
+		mfc0	k0,CP0_CAUSE
+		andi	k0,k0,0x7c
+		add	k1,k1,k0
+		lw	k0,%lo(saved_vectors)(k1)
+		jr	k0
+		nop
+1:
+		move	k0,sp
+		subu	sp,k1,GDB_FR_SIZE*2	# see comment above
+		sd	k0,GDB_FR_REG29(sp)
+		sd	v0,GDB_FR_REG2(sp)
+
+/*
+ * First save the CP0 and special registers
+ */
+
+		mfc0	v0,CP0_STATUS
+		sd	v0,GDB_FR_STATUS(sp)
+		mfc0	v0,CP0_CAUSE
+		sd	v0,GDB_FR_CAUSE(sp)
+		dmfc0	v0,CP0_EPC
+		sd	v0,GDB_FR_EPC(sp)
+		dmfc0	v0,CP0_BADVADDR
+		sd	v0,GDB_FR_BADVADDR(sp)
+		mfhi	v0
+		sd	v0,GDB_FR_HI(sp)
+		mflo	v0
+		sd	v0,GDB_FR_LO(sp)
+
+/*
+ * Now the integer registers
+ */
+
+		sd	zero,GDB_FR_REG0(sp)		/* I know... */
+		sd	$1,GDB_FR_REG1(sp)
+		/* v0 already saved */
+		sd	v1,GDB_FR_REG3(sp)
+		sd	a0,GDB_FR_REG4(sp)
+		sd	a1,GDB_FR_REG5(sp)
+		sd	a2,GDB_FR_REG6(sp)
+		sd	a3,GDB_FR_REG7(sp)
+		sd	a4,GDB_FR_REG8(sp)
+		sd	a5,GDB_FR_REG9(sp)
+		sd	a6,GDB_FR_REG10(sp)
+		sd	a7,GDB_FR_REG11(sp)
+		sd	t0,GDB_FR_REG12(sp)
+		sd	t1,GDB_FR_REG13(sp)
+		sd	t2,GDB_FR_REG14(sp)
+		sd	t3,GDB_FR_REG15(sp)
+		sd	s0,GDB_FR_REG16(sp)
+		sd	s1,GDB_FR_REG17(sp)
+		sd	s2,GDB_FR_REG18(sp)
+		sd	s3,GDB_FR_REG19(sp)
+		sd	s4,GDB_FR_REG20(sp)
+		sd	s5,GDB_FR_REG21(sp)
+		sd	s6,GDB_FR_REG22(sp)
+		sd	s7,GDB_FR_REG23(sp)
+		sd	t8,GDB_FR_REG24(sp)
+		sd	t9,GDB_FR_REG25(sp)
+		sd	k0,GDB_FR_REG26(sp)
+		sd	k1,GDB_FR_REG27(sp)
+		sd	gp,GDB_FR_REG28(sp)
+		/* sp already saved */
+		sd	fp,GDB_FR_REG30(sp)
+		sd	ra,GDB_FR_REG31(sp)
+
+		CLI				/* disable interrupts */
+
+/*
+ * Followed by the floating point registers
+ */
+		mfc0	v0,CP0_STATUS		/* FPU enabled? */
+		srl	v0,v0,16
+		andi	v0,v0,(ST0_CU1 >> 16)
+
+		beqz	v0,2f			/* disabled, skip */
+		 nop
+
+		sdc1	$0,GDB_FR_FPR0(sp)
+		sdc1	$1,GDB_FR_FPR1(sp)
+		sdc1	$2,GDB_FR_FPR2(sp)
+		sdc1	$3,GDB_FR_FPR3(sp)
+		sdc1	$4,GDB_FR_FPR4(sp)
+		sdc1	$5,GDB_FR_FPR5(sp)
+		sdc1	$6,GDB_FR_FPR6(sp)
+		sdc1	$7,GDB_FR_FPR7(sp)
+		sdc1	$8,GDB_FR_FPR8(sp)
+		sdc1	$9,GDB_FR_FPR9(sp)
+		sdc1	$10,GDB_FR_FPR10(sp)
+		sdc1	$11,GDB_FR_FPR11(sp)
+		sdc1	$12,GDB_FR_FPR12(sp)
+		sdc1	$13,GDB_FR_FPR13(sp)
+		sdc1	$14,GDB_FR_FPR14(sp)
+		sdc1	$15,GDB_FR_FPR15(sp)
+		sdc1	$16,GDB_FR_FPR16(sp)
+		sdc1	$17,GDB_FR_FPR17(sp)
+		sdc1	$18,GDB_FR_FPR18(sp)
+		sdc1	$19,GDB_FR_FPR19(sp)
+		sdc1	$20,GDB_FR_FPR20(sp)
+		sdc1	$21,GDB_FR_FPR21(sp)
+		sdc1	$22,GDB_FR_FPR22(sp)
+		sdc1	$23,GDB_FR_FPR23(sp)
+		sdc1	$24,GDB_FR_FPR24(sp)
+		sdc1	$25,GDB_FR_FPR25(sp)
+		sdc1	$26,GDB_FR_FPR26(sp)
+		sdc1	$27,GDB_FR_FPR27(sp)
+		sdc1	$28,GDB_FR_FPR28(sp)
+		sdc1	$29,GDB_FR_FPR29(sp)
+		sdc1	$30,GDB_FR_FPR30(sp)
+		sdc1	$31,GDB_FR_FPR31(sp)
+
+/*
+ * FPU control registers
+ */
+
+		cfc1	v0,CP1_STATUS
+		sd	v0,GDB_FR_FSR(sp)
+		cfc1	v0,CP1_REVISION
+		sd	v0,GDB_FR_FIR(sp)
+
+/*
+ * Current stack frame ptr
+ */
+
+2:
+		sd	sp,GDB_FR_FRP(sp)
+
+/*
+ * CP0 registers (R4000/R4400 unused registers skipped)
+ */
+
+		mfc0	v0,CP0_INDEX
+		sd	v0,GDB_FR_CP0_INDEX(sp)
+		mfc0	v0,CP0_RANDOM
+		sd	v0,GDB_FR_CP0_RANDOM(sp)
+		dmfc0	v0,CP0_ENTRYLO0
+		sd	v0,GDB_FR_CP0_ENTRYLO0(sp)
+		dmfc0	v0,CP0_ENTRYLO1
+		sd	v0,GDB_FR_CP0_ENTRYLO1(sp)
+		dmfc0	v0,CP0_CONTEXT
+		sd	v0,GDB_FR_CP0_CONTEXT(sp)
+		mfc0	v0,CP0_PAGEMASK
+		sd	v0,GDB_FR_CP0_PAGEMASK(sp)
+		mfc0	v0,CP0_WIRED
+		sd	v0,GDB_FR_CP0_WIRED(sp)
+		dmfc0	v0,CP0_ENTRYHI
+		sd	v0,GDB_FR_CP0_ENTRYHI(sp)
+		mfc0	v0,CP0_PRID
+		sd	v0,GDB_FR_CP0_PRID(sp)
+
+		.set	at
+
+/*
+ * Continue with the higher level handler
+ */
+
+		move	a0,sp
+
+		jal	handle_exception
+		 nop
+
+/*
+ * Restore all writable registers, in reverse order
+ */
+
+		.set	noat
+
+		ld	v0,GDB_FR_CP0_ENTRYHI(sp)
+		ld	v1,GDB_FR_CP0_WIRED(sp)
+		dmtc0	v0,CP0_ENTRYHI
+		mtc0	v1,CP0_WIRED
+		ld	v0,GDB_FR_CP0_PAGEMASK(sp)
+		ld	v1,GDB_FR_CP0_ENTRYLO1(sp)
+		mtc0	v0,CP0_PAGEMASK
+		dmtc0	v1,CP0_ENTRYLO1
+		ld	v0,GDB_FR_CP0_ENTRYLO0(sp)
+		ld	v1,GDB_FR_CP0_INDEX(sp)
+		dmtc0	v0,CP0_ENTRYLO0
+		ld	v0,GDB_FR_CP0_CONTEXT(sp)
+		mtc0	v1,CP0_INDEX
+		dmtc0	v0,CP0_CONTEXT
+
+
+/*
+ * Next, the floating point registers
+ */
+		mfc0	v0,CP0_STATUS		/* check if the FPU is enabled */
+		srl	v0,v0,16
+		andi	v0,v0,(ST0_CU1 >> 16)
+
+		beqz	v0,3f			/* disabled, skip */
+		 nop
+
+		ldc1	$31,GDB_FR_FPR31(sp)
+		ldc1	$30,GDB_FR_FPR30(sp)
+		ldc1	$29,GDB_FR_FPR29(sp)
+		ldc1	$28,GDB_FR_FPR28(sp)
+		ldc1	$27,GDB_FR_FPR27(sp)
+		ldc1	$26,GDB_FR_FPR26(sp)
+		ldc1	$25,GDB_FR_FPR25(sp)
+		ldc1	$24,GDB_FR_FPR24(sp)
+		ldc1	$23,GDB_FR_FPR23(sp)
+		ldc1	$22,GDB_FR_FPR22(sp)
+		ldc1	$21,GDB_FR_FPR21(sp)
+		ldc1	$20,GDB_FR_FPR20(sp)
+		ldc1	$19,GDB_FR_FPR19(sp)
+		ldc1	$18,GDB_FR_FPR18(sp)
+		ldc1	$17,GDB_FR_FPR17(sp)
+		ldc1	$16,GDB_FR_FPR16(sp)
+		ldc1	$15,GDB_FR_FPR15(sp)
+		ldc1	$14,GDB_FR_FPR14(sp)
+		ldc1	$13,GDB_FR_FPR13(sp)
+		ldc1	$12,GDB_FR_FPR12(sp)
+		ldc1	$11,GDB_FR_FPR11(sp)
+		ldc1	$10,GDB_FR_FPR10(sp)
+		ldc1	$9,GDB_FR_FPR9(sp)
+		ldc1	$8,GDB_FR_FPR8(sp)
+		ldc1	$7,GDB_FR_FPR7(sp)
+		ldc1	$6,GDB_FR_FPR6(sp)
+		ldc1	$5,GDB_FR_FPR5(sp)
+		ldc1	$4,GDB_FR_FPR4(sp)
+		ldc1	$3,GDB_FR_FPR3(sp)
+		ldc1	$2,GDB_FR_FPR2(sp)
+		ldc1	$1,GDB_FR_FPR1(sp)
+		ldc1	$0,GDB_FR_FPR0(sp)
+
+/*
+ * Now the CP0 and integer registers
+ */
+
+3:
+		mfc0	t0,CP0_STATUS
+		ori	t0,0x1f
+		xori	t0,0x1f
+		mtc0	t0,CP0_STATUS
+
+		ld	v0,GDB_FR_STATUS(sp)
+		ld	v1,GDB_FR_EPC(sp)
+		mtc0	v0,CP0_STATUS
+		dmtc0	v1,CP0_EPC
+		ld	v0,GDB_FR_HI(sp)
+		ld	v1,GDB_FR_LO(sp)
+		mthi	v0
+		mtlo	v0
+		ld	ra,GDB_FR_REG31(sp)
+		ld	fp,GDB_FR_REG30(sp)
+		ld	gp,GDB_FR_REG28(sp)
+		ld	k1,GDB_FR_REG27(sp)
+		ld	k0,GDB_FR_REG26(sp)
+		ld	t9,GDB_FR_REG25(sp)
+		ld	t8,GDB_FR_REG24(sp)
+		ld	s7,GDB_FR_REG23(sp)
+		ld	s6,GDB_FR_REG22(sp)
+		ld	s5,GDB_FR_REG21(sp)
+		ld	s4,GDB_FR_REG20(sp)
+		ld	s3,GDB_FR_REG19(sp)
+		ld	s2,GDB_FR_REG18(sp)
+		ld	s1,GDB_FR_REG17(sp)
+		ld	s0,GDB_FR_REG16(sp)
+		ld	t3,GDB_FR_REG15(sp)
+		ld	t2,GDB_FR_REG14(sp)
+		ld	t1,GDB_FR_REG13(sp)
+		ld	t0,GDB_FR_REG12(sp)
+		ld	a7,GDB_FR_REG11(sp)
+		ld	a6,GDB_FR_REG10(sp)
+		ld	a5,GDB_FR_REG9(sp)
+		ld	a4,GDB_FR_REG8(sp)
+		ld	a3,GDB_FR_REG7(sp)
+		ld	a2,GDB_FR_REG6(sp)
+		ld	a1,GDB_FR_REG5(sp)
+		ld	a0,GDB_FR_REG4(sp)
+		ld	v1,GDB_FR_REG3(sp)
+		ld	v0,GDB_FR_REG2(sp)
+		ld	$1,GDB_FR_REG1(sp)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+		ld	k0, GDB_FR_EPC(sp)
+		ld	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
+		jr	k0
+		rfe
+#else
+		ld	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
+
+		.set	mips3
+		eret
+		.set	mips0
+#endif
+		.set	at
+		.set	reorder
+		END(trap_low)
+
+LEAF(kgdb_read_byte)
+4:		lb	t0, (a0)
+		sb	t0, (a1)
+		li	v0, 0
+		jr	ra
+		.section __ex_table,"a"
+		PTR	4b, kgdbfault
+		.previous
+		END(kgdb_read_byte)
+
+LEAF(kgdb_write_byte)
+5:		sb	a0, (a1)
+		li	v0, 0
+		jr	ra
+		.section __ex_table,"a"
+		PTR	5b, kgdbfault
+		.previous
+		END(kgdb_write_byte)
+
+		.type	kgdbfault@function
+		.ent	kgdbfault
+
+kgdbfault:	li	v0, -EFAULT
+		jr	ra
+		.end	kgdbfault

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)