patch-2.4.22 linux-2.4.22/arch/ia64/sn/io/sn1/huberror.c

• Lines: 229
• Date: 1969-12-31 16:00:00.000000000 -0800
• Orig file: linux-2.4.21/arch/ia64/sn/io/sn1/huberror.c
• Orig date: 2002-08-02 17:39:43.000000000 -0700

diff -urN linux-2.4.21/arch/ia64/sn/io/sn1/huberror.c linux-2.4.22/arch/ia64/sn/io/sn1/huberror.c
@@ -1,228 +0,0 @@
-/* $Id: huberror.c,v 1.1 2002/02/28 17:31:25 marcelo Exp $
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2002 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/smp.h>
-#include <asm/sn/sgi.h>
-#include <asm/sn/io.h>
-#include <asm/sn/iograph.h>
-#include <asm/sn/invent.h>
-#include <asm/sn/hcl.h>
-#include <asm/sn/labelcl.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/pci/pciio.h>
-#include <asm/sn/pci/pcibr.h>
-#include <asm/sn/xtalk/xtalk.h>
-#include <asm/sn/pci/pcibr_private.h>
-#include <asm/sn/intr.h>
-
-extern void hubni_eint_init(cnodeid_t cnode);
-extern void hubii_eint_init(cnodeid_t cnode);
-extern void hubii_eint_handler (int irq, void *arg, struct pt_regs *ep);
-extern void snia_error_intr_handler(int irq, void *devid, struct pt_regs *pt_regs);
-
-extern int maxcpus;
-
-#define HUB_ERROR_PERIOD        (120 * HZ)      /* 2 minutes */
-
-
-void
-hub_error_clear(nasid_t nasid)
-{
-	int i;
-	hubreg_t idsr;
-	int sn;
-
-	for(sn=0; sn<NUM_SUBNODES; sn++) {
-		REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_PEND, -1);
-		REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STATUS0_A_CLR, -1);
-		REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STATUS0_B_CLR, -1);
-		REMOTE_HUB_PI_S(nasid, sn, PI_SPURIOUS_HDR_0, 0);
-		REMOTE_HUB_PI_S(nasid, sn, PI_SPURIOUS_HDR_1, 0);
-	}
-
-	REMOTE_HUB_L(nasid, MD_DIR_ERROR_CLR);
-	REMOTE_HUB_L(nasid, MD_MEM_ERROR_CLR);
-	REMOTE_HUB_L(nasid, MD_MISC1_ERROR_CLR);
-	REMOTE_HUB_L(nasid, MD_PROTOCOL_ERR_CLR);
-
-    /*
-     * Make sure spurious write response errors are cleared
-     * (values are from hub_set_prb())
-     */
-    for (i = 0; i <= HUB_WIDGET_ID_MAX - HUB_WIDGET_ID_MIN + 1; i++) {
-        iprb_t prb;
-
-	prb.iprb_regval = REMOTE_HUB_L(nasid, IIO_IOPRB_0 + (i * sizeof(hubreg_t)));
-
-        /* Clear out some fields */
-        prb.iprb_ovflow = 1;
-        prb.iprb_bnakctr = 0;
-        prb.iprb_anakctr = 0;
-
-	/*
-	 * PIO reads in fire-and-forget mode on bedrock 1.0 don't
-	 * frob the credit count properly, making the responses appear
-	 * spurious.  So don't use fire-and-forget mode.  Bug 761802.
-	 */
-        prb.iprb_ff = 0;        /* disable fire-and-forget mode by default */
-
-        prb.iprb_xtalkctr = 3;  /* approx. PIO credits for the widget */
-
-        REMOTE_HUB_S(nasid, IIO_IOPRB_0 + (i * sizeof(hubreg_t)), prb.iprb_regval);
-    }
-
-    REMOTE_HUB_S(nasid, IIO_IO_ERR_CLR, -1);
-    idsr = REMOTE_HUB_L(nasid, IIO_IIDSR);
-    REMOTE_HUB_S(nasid, IIO_IIDSR, (idsr & ~(IIO_IIDSR_SENT_MASK)));
-
-    REMOTE_HUB_L(nasid, NI_PORT_ERROR_CLEAR);
-    /* No need to clear NI_PORT_HEADER regs; they are continually overwritten*/
-
-    REMOTE_HUB_S(nasid, LB_ERROR_MASK_CLR, -1);
-    REMOTE_HUB_S(nasid, LB_ERROR_HDR1, 0);
-
-    /* Clear XB error regs, in order */
-    for (i = 0;
-         i <= XB_FIRST_ERROR_CLEAR - XB_POQ0_ERROR_CLEAR;
-         i += sizeof(hubreg_t)) {
-        REMOTE_HUB_S(nasid, XB_POQ0_ERROR_CLEAR + i, 0);
-    }
-}
-
-
-/*
- * Function	: hub_error_init
- * Purpose	: initialize the error handling requirements for a given hub.
- * Parameters	: cnode, the compact nodeid.
- * Assumptions	: Called only once per hub, either by a local cpu. Or by a 
- *			remote cpu, when this hub is headless.(cpuless)
- * Returns	: None
- */
-
-void
-hub_error_init(cnodeid_t cnode)
-{
-	nasid_t nasid;
-
-    nasid = cnodeid_to_nasid(cnode);
-    hub_error_clear(nasid);
-
-    /*
-     * Now setup the hub ii and ni error interrupt handler.
-     */
-
-    hubii_eint_init(cnode);
-    hubni_eint_init(cnode);
-
-    return;
-}
-
-/*
- * Function	: hubii_eint_init
- * Parameters	: cnode
- * Purpose	: to initialize the hub iio error interrupt.
- * Assumptions	: Called once per hub, by the cpu which will ultimately
- *			handle this interrupt.
- * Returns	: None.
- */
-
-
-void
-hubii_eint_init(cnodeid_t cnode)
-{
-    int			bit, rv;
-    ii_iidsr_u_t    	hubio_eint;
-    hubinfo_t		hinfo; 
-    cpuid_t		intr_cpu;
-    devfs_handle_t 	hub_v;
-    ii_ilcsr_u_t	ilcsr;
-    int bit_pos_to_irq(int bit);
-    int synergy_intr_connect(int bit, int cpuid);
-
-
-    hub_v = (devfs_handle_t)cnodeid_to_vertex(cnode);
-    ASSERT_ALWAYS(hub_v);
-    hubinfo_get(hub_v, &hinfo);
-
-    ASSERT(hinfo);
-    ASSERT(hinfo->h_cnodeid == cnode);
-
-    ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);
-
-    if ((ilcsr.ii_ilcsr_fld_s.i_llp_stat & 0x2) == 0) {
-	/* 
-	 * HUB II link is not up. 
-	 * Just disable LLP, and don't connect any interrupts.
-	 */
-	ilcsr.ii_ilcsr_fld_s.i_llp_en = 0;
-	REMOTE_HUB_S(hinfo->h_nasid, IIO_ILCSR, ilcsr.ii_ilcsr_regval);
-	return;
-    }
-    /* Select a possible interrupt target where there is a free interrupt
-     * bit and also reserve the interrupt bit for this IO error interrupt
-     */
-    intr_cpu = intr_heuristic(hub_v,0,INTRCONNECT_ANYBIT,II_ERRORINT,hub_v,
-			      "HUB IO error interrupt",&bit);
-    if (intr_cpu == CPU_NONE) {
-	printk("hubii_eint_init: intr_reserve_level failed, cnode %d", cnode);
-	return;
-    }
-	
-    rv = intr_connect_level(intr_cpu, bit, 0, NULL);
-    synergy_intr_connect(bit, intr_cpu);
-    request_irq(bit_pos_to_irq(bit) + (intr_cpu << 8), hubii_eint_handler, 0, "SN hub error", (void *)hub_v);
-    ASSERT_ALWAYS(rv >= 0);
-    hubio_eint.ii_iidsr_regval = 0;
-    hubio_eint.ii_iidsr_fld_s.i_enable = 1;
-    hubio_eint.ii_iidsr_fld_s.i_level = bit;/* Take the least significant bits*/
-    hubio_eint.ii_iidsr_fld_s.i_node = COMPACT_TO_NASID_NODEID(cnode);
-    hubio_eint.ii_iidsr_fld_s.i_pi_id = cpuid_to_subnode(intr_cpu);
-    REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, hubio_eint.ii_iidsr_regval);
-
-}
-
-void
-hubni_eint_init(cnodeid_t cnode)
-{
-    int intr_bit;
-    cpuid_t targ;
-
-
-    if ((targ = cnodeid_to_cpuid(cnode)) == CPU_NONE)
-	return;
-
-	/* The prom chooses which cpu gets these interrupts, but we
-	*  don't know which one it chose.  We will register all of the 
-	*  cpus to be sure.  This only costs us an irqaction per cpu.
-	*/
-    for (; targ < CPUS_PER_NODE; targ++) {
-	if (!cpu_enabled(targ) ) continue;
-	/* connect the INTEND1 bits. */
-	for (intr_bit = XB_ERROR; intr_bit <= MSC_PANIC_INTR; intr_bit++) {
-		intr_connect_level(targ, intr_bit, II_ERRORINT, NULL);
-	}
-	request_irq(SGI_HUB_ERROR_IRQ + (targ << 8), snia_error_intr_handler, 0, "SN hub error", NULL);
-	/* synergy masks are initialized in the prom to enable all interrupts. */
-	/* We'll just leave them that way, here, for these interrupts. */
-    }
-}
-
-
-/*ARGSUSED*/
-void
-hubii_eint_handler (int irq, void *arg, struct pt_regs *ep)
-{
-
-	panic("Hubii interrupt\n");
-}