patch-2.1.70 linux/include/linux/sbpcd.h
Next file: linux/include/linux/sched.h
Previous file: linux/include/linux/optcd.h
Back to the patch index
Back to the overall index
- Lines: 859
- Date:
Wed Dec 31 16:00:00 1969
- Orig file:
v2.1.69/linux/include/linux/sbpcd.h
- Orig date:
Sat Aug 31 23:14:25 1996
diff -u --recursive --new-file v2.1.69/linux/include/linux/sbpcd.h linux/include/linux/sbpcd.h
@@ -1,858 +0,0 @@
-/*
- * sbpcd.h Specify interface address and interface type here.
- */
-
-/*
- * Attention! This file contains user-serviceable parts!
- * I recommend to make use of it...
- * If you feel helpless, look into linux/Documentation/cdrom/sbpcd
- * (good idea anyway, at least before mailing me).
- *
- * The definitions for the first controller can get overridden by
- * the kernel command line ("lilo boot option").
- * Examples:
- * sbpcd=0x300,LaserMate
- * or
- * sbpcd=0x230,SoundBlaster
- * or
- * sbpcd=0x338,SoundScape
- * or
- * sbpcd=0x2C0,Teac16bit
- *
- * If sbpcd gets used as a module, you can load it with
- * insmod sbpcd.o sbpcd=0x300,0
- * or
- * insmod sbpcd.o sbpcd=0x230,1
- * or
- * insmod sbpcd.o sbpcd=0x338,2
- * or
- * insmod sbpcd.o sbpcd=0x2C0,3
- * respective to override the configured address and type.
- */
-
-/*
- * define your CDROM port base address as CDROM_PORT
- * and specify the type of your interface card as SBPRO.
- *
- * address:
- * ========
- * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
- * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
- * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
- * specify the REAL address here, not the configuration port address. Look
- * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
- * sbpcd auto-probe, if you are not firm with the address.
- * There are some soundcards on the market with 0x0630, 0x0650, ...; their
- * type is not obvious (both types are possible).
- *
- * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
- * if your soundcard has its CDROM port above 0x300, specify
- * that address and try SBPRO 0 first.
- * if your SoundScape configuration port is at 0x330, specify
- * 0x338 and SBPRO 2.
- *
- * interface type:
- * ===============
- * set SBPRO to 1 for "true" SoundBlaster card
- * set SBPRO to 0 for "compatible" soundcards and
- * for "poor" (no sound) interface cards.
- * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
- * set SBPRO to 3 for Teac 16bit interface cards
- *
- * Almost all "compatible" sound boards need to set SBPRO to 0.
- * If SBPRO is set wrong, the drives will get found - but any
- * data access will give errors (audio access will work).
- * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
- * interface cards need SBPRO 1.
- *
- * sound base:
- * ===========
- * The SOUND_BASE definition tells if we should try to turn the CD sound
- * channels on. It will only be of use regarding soundcards with a SbPro
- * compatible mixer.
- *
- * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
- * #define SOUND_BASE 0 leaves the soundcard untouched
- */
-#if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */
-#define CDROM_PORT 0x340 /* <-----------<< port address */
-#define SBPRO 0 /* <-----------<< interface type */
-#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
-#endif
-#if !(SBPCD_ISSUE-2) /* ==================== second interface board: === */
-#define CDROM_PORT 0x344 /* <-----------<< port address */
-#define SBPRO 0 /* <-----------<< interface type */
-#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */
-#endif
-#if !(SBPCD_ISSUE-3) /* ===================== third interface board: === */
-#define CDROM_PORT 0x630 /* <-----------<< port address */
-#define SBPRO 1 /* <-----------<< interface type */
-#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x240 /* <-----------<< sound address of this card or 0 */
-#endif
-#if !(SBPCD_ISSUE-4) /* ==================== fourth interface board: === */
-#define CDROM_PORT 0x634 /* <-----------<< port address */
-#define SBPRO 0 /* <-----------<< interface type */
-#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */
-#endif
-
-/*
- * some more or less user dependent definitions - service them!
- */
-
-/* Set this to 0 once you have configured your interface definitions right. */
-#define DISTRIBUTION 1
-
-/*
- * Time to wait after giving a message.
- * This gets important if you enable non-standard DBG_xxx flags.
- * You will see what happens if you omit the pause or make it
- * too short. Be warned!
- */
-#define KLOGD_PAUSE 1
-
-/* tray control: eject tray if no disk is in */
-#if DISTRIBUTION
-#define JUKEBOX 0
-#else
-#define JUKEBOX 1
-#endif DISTRIBUTION
-
-/* tray control: eject tray after last use */
-#if DISTRIBUTION
-#define EJECT 0
-#else
-#define EJECT 1
-#endif DISTRIBUTION
-
-/* max. number of audio frames to read with one */
-/* request (allocates n* 2352 bytes kernel memory!) */
-/* may be freely adjusted, f.e. 75 (= 1 sec.), at */
-/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
-#define READ_AUDIO 0
-
-/* Optimizations for the Teac CD-55A drive read performance.
- * SBP_TEAC_SPEED can be changed here, or one can set the
- * variable "teac" when loading as a module.
- * Valid settings are:
- * 0 - very slow - the recommended "DISTRIBUTION 1" setup.
- * 1 - 2x performance with little overhead. No busy waiting.
- * 2 - 4x performance with 5ms overhead per read. Busy wait.
- *
- * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
- * other than 0 may cause problems. If you run into them, first
- * change SBP_TEAC_SPEED back to 0 and see if your drive responds
- * normally. If yes, you are "allowed" to report your case - to help
- * me with the driver, not to solve your hassle. Donīt mail if you
- * simply are stuck into your own "tuning" experiments, you know?
- */
-#define SBP_TEAC_SPEED 1
-
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * nothing to change below here if you are not fully aware what you're doing
- */
-#ifndef _LINUX_SBPCD_H
-
-#define _LINUX_SBPCD_H
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * driver's own read_ahead, data mode
- */
-#define SBP_BUFFER_FRAMES 8
-
-#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
-#undef FUTURE
-#undef SAFE_MIXED
-
-#define TEST_UPC 0
-#define SPEA_TEST 0
-#define TEST_STI 0
-#define OLD_BUSY 0
-#undef PATH_CHECK
-#ifndef SOUND_BASE
-#define SOUND_BASE 0
-#endif
-#if DISTRIBUTION
-#undef SBP_TEAC_SPEED
-#define SBP_TEAC_SPEED 0
-#endif
-/*==========================================================================*/
-/*
- * DDI interface definitions
- * "invented" by Fred N. van Kempen..
- */
-#define DDIOCSDBG 0x9000
-
-/*==========================================================================*/
-/*
- * "private" IOCTL functions
- */
-#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
-
-/*==========================================================================*/
-/*
- * Debug output levels
- */
-#define DBG_INF 1 /* necessary information */
-#define DBG_BSZ 2 /* BLOCK_SIZE trace */
-#define DBG_REA 3 /* READ status trace */
-#define DBG_CHK 4 /* MEDIA CHECK trace */
-#define DBG_TIM 5 /* datarate timer test */
-#define DBG_INI 6 /* initialization trace */
-#define DBG_TOC 7 /* tell TocEntry values */
-#define DBG_IOC 8 /* ioctl trace */
-#define DBG_STA 9 /* ResponseStatus() trace */
-#define DBG_ERR 10 /* cc_ReadError() trace */
-#define DBG_CMD 11 /* cmd_out() trace */
-#define DBG_WRN 12 /* give explanation before auto-probing */
-#define DBG_MUL 13 /* multi session code test */
-#define DBG_IDX 14 /* test code for drive_id !=0 */
-#define DBG_IOX 15 /* some special information */
-#define DBG_DID 16 /* drive ID test */
-#define DBG_RES 17 /* drive reset info */
-#define DBG_SPI 18 /* SpinUp test */
-#define DBG_IOS 19 /* ioctl trace: subchannel functions */
-#define DBG_IO2 20 /* ioctl trace: general */
-#define DBG_UPC 21 /* show UPC information */
-#define DBG_XA1 22 /* XA mode debugging */
-#define DBG_LCK 23 /* door (un)lock info */
-#define DBG_SQ1 24 /* dump SubQ frame */
-#define DBG_AUD 25 /* READ AUDIO debugging */
-#define DBG_SEQ 26 /* Sequoia interface configuration trace */
-#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
-#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
-#define DBG_TEA 29 /* TEAC CD-55A debugging trace */
-#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
-#define DBG_000 31 /* unnecessary information */
-
-/*==========================================================================*/
-/*==========================================================================*/
-
-/*
- * bits of flags_cmd_out:
- */
-#define f_respo3 0x100
-#define f_putcmd 0x80
-#define f_respo2 0x40
-#define f_lopsta 0x20
-#define f_getsta 0x10
-#define f_ResponseStatus 0x08
-#define f_obey_p_check 0x04
-#define f_bit1 0x02
-#define f_wait_if_busy 0x01
-
-/*
- * diskstate_flags:
- */
-#define x80_bit 0x80
-#define upc_bit 0x40
-#define volume_bit 0x20
-#define toc_bit 0x10
-#define multisession_bit 0x08
-#define cd_size_bit 0x04
-#define subq_bit 0x02
-#define frame_size_bit 0x01
-
-/*
- * disk states (bits of diskstate_flags):
- */
-#define upc_valid (D_S[d].diskstate_flags&upc_bit)
-#define volume_valid (D_S[d].diskstate_flags&volume_bit)
-#define toc_valid (D_S[d].diskstate_flags&toc_bit)
-#define cd_size_valid (D_S[d].diskstate_flags&cd_size_bit)
-#define subq_valid (D_S[d].diskstate_flags&subq_bit)
-#define frame_size_valid (D_S[d].diskstate_flags&frame_size_bit)
-
-/*
- * the status_bits variable
- */
-#define p_success 0x100
-#define p_door_closed 0x80
-#define p_caddy_in 0x40
-#define p_spinning 0x20
-#define p_check 0x10
-#define p_busy_new 0x08
-#define p_door_locked 0x04
-#define p_disk_ok 0x01
-
-/*
- * LCS-7260 special status result bits:
- */
-#define p_lcs_door_locked 0x02
-#define p_lcs_door_closed 0x01 /* probably disk_in */
-
-/*
- * CR-52x special status result bits:
- */
-#define p_caddin_old 0x40
-#define p_success_old 0x08
-#define p_busy_old 0x04
-#define p_bit_1 0x02 /* hopefully unused now */
-
-/*
- * "generation specific" defs of the status result bits:
- */
-#define p0_door_closed 0x80
-#define p0_caddy_in 0x40
-#define p0_spinning 0x20
-#define p0_check 0x10
-#define p0_success 0x08 /* unused */
-#define p0_busy 0x04
-#define p0_bit_1 0x02 /* unused */
-#define p0_disk_ok 0x01
-
-#define pL_disk_in 0x40
-#define pL_spinning 0x20
-#define pL_check 0x10
-#define pL_success 0x08 /* unused ?? */
-#define pL_busy 0x04
-#define pL_door_locked 0x02
-#define pL_door_closed 0x01
-
-#define pV_door_closed 0x40
-#define pV_spinning 0x20
-#define pV_check 0x10
-#define pV_success 0x08
-#define pV_busy 0x04
-#define pV_door_locked 0x02
-#define pV_disk_ok 0x01
-
-#define p1_door_closed 0x80
-#define p1_disk_in 0x40
-#define p1_spinning 0x20
-#define p1_check 0x10
-#define p1_busy 0x08
-#define p1_door_locked 0x04
-#define p1_bit_1 0x02 /* unused */
-#define p1_disk_ok 0x01
-
-#define p2_disk_ok 0x80
-#define p2_door_locked 0x40
-#define p2_spinning 0x20
-#define p2_busy2 0x10
-#define p2_busy1 0x08
-#define p2_door_closed 0x04
-#define p2_disk_in 0x02
-#define p2_check 0x01
-
-/*
- * used drive states:
- */
-#define st_door_closed (D_S[d].status_bits&p_door_closed)
-#define st_caddy_in (D_S[d].status_bits&p_caddy_in)
-#define st_spinning (D_S[d].status_bits&p_spinning)
-#define st_check (D_S[d].status_bits&p_check)
-#define st_busy (D_S[d].status_bits&p_busy_new)
-#define st_door_locked (D_S[d].status_bits&p_door_locked)
-#define st_diskok (D_S[d].status_bits&p_disk_ok)
-
-/*
- * bits of the CDi_status register:
- */
-#define s_not_result_ready 0x04 /* 0: "result ready" */
-#define s_not_data_ready 0x02 /* 0: "data ready" */
-#define s_attention 0x01 /* 1: "attention required" */
-/*
- * usable as:
- */
-#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
-#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
-#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
-
-/*
- * drive families and types (firmware versions):
- */
-#define drv_fam0 0x0100 /* CR-52x family */
-#define drv_199 (drv_fam0+0x01) /* <200 */
-#define drv_200 (drv_fam0+0x02) /* <201 */
-#define drv_201 (drv_fam0+0x03) /* <210 */
-#define drv_210 (drv_fam0+0x04) /* <211 */
-#define drv_211 (drv_fam0+0x05) /* <300 */
-#define drv_300 (drv_fam0+0x06) /* >=300 */
-
-#define drv_fam1 0x0200 /* CR-56x family */
-#define drv_099 (drv_fam1+0x01) /* <100 */
-#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
-
-#define drv_fam2 0x0400 /* CD200 family */
-
-#define drv_famT 0x0800 /* TEAC CD-55A */
-
-#define drv_famL 0x1000 /* Longshine family */
-#define drv_260 (drv_famL+0x01) /* LCS-7260 */
-#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
-#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
-
-#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
-#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
-
-#define fam0_drive (D_S[d].drv_type&drv_fam0)
-#define famL_drive (D_S[d].drv_type&drv_famL)
-#define famV_drive (D_S[d].drv_type&drv_famV)
-#define fam1_drive (D_S[d].drv_type&drv_fam1)
-#define fam2_drive (D_S[d].drv_type&drv_fam2)
-#define famT_drive (D_S[d].drv_type&drv_famT)
-#define fam0L_drive (D_S[d].drv_type&(drv_fam0|drv_famL))
-#define fam0V_drive (D_S[d].drv_type&(drv_fam0|drv_famV))
-#define famLV_drive (D_S[d].drv_type&(drv_famL|drv_famV))
-#define fam0LV_drive (D_S[d].drv_type&(drv_fam0|drv_famL|drv_famV))
-#define fam1L_drive (D_S[d].drv_type&(drv_fam1|drv_famL))
-#define fam1V_drive (D_S[d].drv_type&(drv_fam1|drv_famV))
-#define fam1LV_drive (D_S[d].drv_type&(drv_fam1|drv_famL|drv_famV))
-#define fam01_drive (D_S[d].drv_type&(drv_fam0|drv_fam1))
-#define fam12_drive (D_S[d].drv_type&(drv_fam1|drv_fam2))
-#define fam2T_drive (D_S[d].drv_type&(drv_fam2|drv_famT))
-
-/*
- * audio states:
- */
-#define audio_playing 2
-#define audio_pausing 1
-
-/*
- * drv_pattern, drv_options:
- */
-#define speed_auto 0x80
-#define speed_300 0x40
-#define speed_150 0x20
-#define audio_mono 0x04
-
-/*
- * values of cmd_type (0 else):
- */
-#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
-#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
-#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
-#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
-
-/*
- * sense_byte:
- *
- * values: 00
- * 01
- * 81
- * 82 "raw audio" mode
- * xx from infobuf[0] after 85 00 00 00 00 00 00
- */
-
-/* audio status (bin) */
-#define aud_00 0x00 /* Audio status byte not supported or not valid */
-#define audx11 0x0b /* Audio play operation in progress */
-#define audx12 0x0c /* Audio play operation paused */
-#define audx13 0x0d /* Audio play operation successfully completed */
-#define audx14 0x0e /* Audio play operation stopped due to error */
-#define audx15 0x0f /* No current audio status to return */
-/* audio status (bcd) */
-#define aud_11 0x11 /* Audio play operation in progress */
-#define aud_12 0x12 /* Audio play operation paused */
-#define aud_13 0x13 /* Audio play operation successfully completed */
-#define aud_14 0x14 /* Audio play operation stopped due to error */
-#define aud_15 0x15 /* No current audio status to return */
-
-/*
- * highest allowed drive number (MINOR+1)
- */
-#define NR_SBPCD 4
-
-/*
- * we try to never disable interrupts - seems to work
- */
-#define SBPCD_DIS_IRQ 0
-
-/*
- * "write byte to port"
- */
-#define OUT(x,y) outb(y,x)
-
-/*==========================================================================*/
-
-#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
-#define MIXER_data SOUND_BASE+5 /* sound card's data register */
-#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
-
-/*==========================================================================*/
-
-#define MAX_TRACKS 99
-
-#define ERR_DISKCHANGE 615
-
-/*==========================================================================*/
-/*
- * To make conversions easier (machine dependent!)
- */
-typedef union _msf
-{
- u_int n;
- u_char c[4];
-} MSF;
-
-typedef union _blk
-{
- u_int n;
- u_char c[4];
-} BLK;
-
-/*==========================================================================*/
-
-/*============================================================================
-==============================================================================
-
-COMMAND SET of "old" drives like CR-521, CR-522
- (the CR-562 family is different):
-
-No. Command Code
---------------------------------------------
-
-Drive Commands:
- 1 Seek 01
- 2 Read Data 02
- 3 Read XA-Data 03
- 4 Read Header 04
- 5 Spin Up 05
- 6 Spin Down 06
- 7 Diagnostic 07
- 8 Read UPC 08
- 9 Read ISRC 09
-10 Play Audio 0A
-11 Play Audio MSF 0B
-12 Play Audio Track/Index 0C
-
-Status Commands:
-13 Read Status 81
-14 Read Error 82
-15 Read Drive Version 83
-16 Mode Select 84
-17 Mode Sense 85
-18 Set XA Parameter 86
-19 Read XA Parameter 87
-20 Read Capacity 88
-21 Read SUB_Q 89
-22 Read Disc Code 8A
-23 Read Disc Information 8B
-24 Read TOC 8C
-25 Pause/Resume 8D
-26 Read Packet 8E
-27 Read Path Check 00
-
-
-all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
-
-mnemo 7-byte command #bytes response (r0...rn)
-________ ____________________ ____
-
-Read Status:
-status: 81. (1) one-byte command, gives the main
- status byte
-Read Error:
-check1: 82 00 00 00 00 00 00. (6) r1: audio status
-
-Read Packet:
-check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
- to commands 01 04 05 07 08 09
-
-Play Audio:
-play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
- nn-nn-nn: #blocks
-Play Audio MSF:
- 0b mm-ss-ff mm-ss-ff (0) play audio from/to
-
-Play Audio Track/Index:
- 0c ...
-
-Pause/Resume:
-pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
- resume (pr=80) audio playing
-
-Mode Select:
- 84 00 nn-nn ??-?? 00 (0) nn-nn: 2048 or 2340
- possibly defines transfer size
-
-set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
- le(vel): min=0, max=FF, else half
- (firmware 2.11)
-
-Mode Sense:
-get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
-
-Read Disc Information:
-tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
-
-Read TOC:
-tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
- (fl=0:"lba"-, =2:"msf-bin"-format)
-
-Read Capacity:
-capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
-
-
-Read Path Check:
-ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
- ("ping" if the drive is connected)
-
-Read Drive Version:
-ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
- (n.nn = 2.01, 2.11., 3.00, ...)
-
-Seek:
-seek: 01 00 ll-bb-aa 00 00. (0)
-seek: 01 02 mm-ss-ff 00 00. (0)
-
-Read Data:
-read: 02 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2048 bytes,
- starting at block xx-xx-xx
- fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read XA-Data:
-read: 03 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2340 bytes,
- starting at block xx-xx-xx
- fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read SUB_Q:
- 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
- fl=0: "lba", fl=2: "msf"
-
-Read Disc Code:
- 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
-
-Read Header:
- 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
- 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
-
-Spin Up:
- 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
-
-Spin Down:
- 06 ...
-
-Diagnostic:
- 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
- 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
-
-Read UPC:
- 08 00 ll-bb-aa 00 00. (16)
- 08 02 mm-ss-ff 00 00. (16)
-
-Read ISRC:
- 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
- 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
-
-Set XA Parameter:
- 86 ...
-
-Read XA Parameter:
- 87 ...
-
-==============================================================================
-============================================================================*/
-
-/*
- * commands
- *
- * CR-52x: CMD0_
- * CR-56x: CMD1_
- * CD200: CMD2_
- * LCS-7260: CMDL_
- * TEAC CD-55A: CMDT_
- * ECS-AT: CMDV_
- */
-#define CMD1_RESET 0x0a
-#define CMD2_RESET 0x01
-#define CMDT_RESET 0xc0
-
-#define CMD1_LOCK_CTL 0x0c
-#define CMD2_LOCK_CTL 0x1e
-#define CMDT_LOCK_CTL CMD2_LOCK_CTL
-#define CMDL_LOCK_CTL 0x0e
-#define CMDV_LOCK_CTL CMDL_LOCK_CTL
-
-#define CMD1_TRAY_CTL 0x07
-#define CMD2_TRAY_CTL 0x1b
-#define CMDT_TRAY_CTL CMD2_TRAY_CTL
-#define CMDL_TRAY_CTL 0x0d
-#define CMDV_TRAY_CTL CMDL_TRAY_CTL
-
-#define CMD1_MULTISESS 0x8d
-#define CMDL_MULTISESS 0x8c
-#define CMDV_MULTISESS CMDL_MULTISESS
-
-#define CMD1_SUBCHANINF 0x11
-#define CMD2_SUBCHANINF 0x??
-
-#define CMD1_ABORT 0x08
-#define CMD2_ABORT 0x08
-#define CMDT_ABORT 0x08
-
-#define CMD2_x02 0x02
-
-#define CMD2_SETSPEED 0xda
-
-#define CMD0_PATH_CHECK 0x00
-#define CMD1_PATH_CHECK 0x???
-#define CMD2_PATH_CHECK 0x???
-#define CMDT_PATH_CHECK 0x???
-#define CMDL_PATH_CHECK CMD0_PATH_CHECK
-#define CMDV_PATH_CHECK CMD0_PATH_CHECK
-
-#define CMD0_SEEK 0x01
-#define CMD1_SEEK CMD0_SEEK
-#define CMD2_SEEK 0x2b
-#define CMDT_SEEK CMD2_SEEK
-#define CMDL_SEEK CMD0_SEEK
-#define CMDV_SEEK CMD0_SEEK
-
-#define CMD0_READ 0x02
-#define CMD1_READ 0x10
-#define CMD2_READ 0x28
-#define CMDT_READ CMD2_READ
-#define CMDL_READ CMD0_READ
-#define CMDV_READ CMD0_READ
-
-#define CMD0_READ_XA 0x03
-#define CMD2_READ_XA 0xd4
-#define CMD2_READ_XA2 0xd5
-#define CMDL_READ_XA CMD0_READ_XA /* really ?? */
-#define CMDV_READ_XA CMD0_READ_XA
-
-#define CMD0_READ_HEAD 0x04
-
-#define CMD0_SPINUP 0x05
-#define CMD1_SPINUP 0x02
-#define CMD2_SPINUP CMD2_TRAY_CTL
-#define CMDL_SPINUP CMD0_SPINUP
-#define CMDV_SPINUP CMD0_SPINUP
-
-#define CMD0_SPINDOWN 0x06 /* really??? */
-#define CMD1_SPINDOWN 0x06
-#define CMD2_SPINDOWN CMD2_TRAY_CTL
-#define CMDL_SPINDOWN 0x0d
-#define CMDV_SPINDOWN CMD0_SPINDOWN
-
-#define CMD0_DIAG 0x07
-
-#define CMD0_READ_UPC 0x08
-#define CMD1_READ_UPC 0x88
-#define CMD2_READ_UPC 0x???
-#define CMDL_READ_UPC CMD0_READ_UPC
-#define CMDV_READ_UPC 0x8f
-
-#define CMD0_READ_ISRC 0x09
-
-#define CMD0_PLAY 0x0a
-#define CMD1_PLAY 0x???
-#define CMD2_PLAY 0x???
-#define CMDL_PLAY CMD0_PLAY
-#define CMDV_PLAY CMD0_PLAY
-
-#define CMD0_PLAY_MSF 0x0b
-#define CMD1_PLAY_MSF 0x0e
-#define CMD2_PLAY_MSF 0x47
-#define CMDT_PLAY_MSF CMD2_PLAY_MSF
-#define CMDL_PLAY_MSF 0x???
-
-#define CMD0_PLAY_TI 0x0c
-#define CMD1_PLAY_TI 0x0f
-
-#define CMD0_STATUS 0x81
-#define CMD1_STATUS 0x05
-#define CMD2_STATUS 0x00
-#define CMDT_STATUS CMD2_STATUS
-#define CMDL_STATUS CMD0_STATUS
-#define CMDV_STATUS CMD0_STATUS
-#define CMD2_SEEK_LEADIN 0x00
-
-#define CMD0_READ_ERR 0x82
-#define CMD1_READ_ERR CMD0_READ_ERR
-#define CMD2_READ_ERR 0x03
-#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
-#define CMDL_READ_ERR CMD0_READ_ERR
-#define CMDV_READ_ERR CMD0_READ_ERR
-
-#define CMD0_READ_VER 0x83
-#define CMD1_READ_VER CMD0_READ_VER
-#define CMD2_READ_VER 0x12
-#define CMDT_READ_VER CMD2_READ_VER /* really ?? */
-#define CMDL_READ_VER CMD0_READ_VER
-#define CMDV_READ_VER CMD0_READ_VER
-
-#define CMD0_SETMODE 0x84
-#define CMD1_SETMODE 0x09
-#define CMD2_SETMODE 0x55
-#define CMDT_SETMODE CMD2_SETMODE
-#define CMDL_SETMODE CMD0_SETMODE
-
-#define CMD0_GETMODE 0x85
-#define CMD1_GETMODE 0x84
-#define CMD2_GETMODE 0x5a
-#define CMDT_GETMODE CMD2_GETMODE
-#define CMDL_GETMODE CMD0_GETMODE
-
-#define CMD0_SET_XA 0x86
-
-#define CMD0_GET_XA 0x87
-
-#define CMD0_CAPACITY 0x88
-#define CMD1_CAPACITY 0x85
-#define CMD2_CAPACITY 0x25
-#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
-
-#define CMD0_READSUBQ 0x89
-#define CMD1_READSUBQ 0x87
-#define CMD2_READSUBQ 0x42
-#define CMDT_READSUBQ CMD2_READSUBQ
-#define CMDL_READSUBQ CMD0_READSUBQ
-#define CMDV_READSUBQ CMD0_READSUBQ
-
-#define CMD0_DISKCODE 0x8a
-
-#define CMD0_DISKINFO 0x8b
-#define CMD1_DISKINFO CMD0_DISKINFO
-#define CMD2_DISKINFO 0x43
-#define CMDT_DISKINFO CMD2_DISKINFO
-#define CMDL_DISKINFO CMD0_DISKINFO
-#define CMDV_DISKINFO CMD0_DISKINFO
-
-#define CMD0_READTOC 0x8c
-#define CMD1_READTOC CMD0_READTOC
-#define CMD2_READTOC 0x???
-#define CMDL_READTOC CMD0_READTOC
-#define CMDV_READTOC CMD0_READTOC
-
-#define CMD0_PAU_RES 0x8d
-#define CMD1_PAU_RES 0x0d
-#define CMD2_PAU_RES 0x4b
-#define CMDT_PAUSE CMD2_PAU_RES
-#define CMDL_PAU_RES CMD0_PAU_RES
-#define CMDV_PAUSE CMD0_PAU_RES
-
-#define CMD0_PACKET 0x8e
-#define CMD1_PACKET CMD0_PACKET
-#define CMD2_PACKET 0x???
-#define CMDL_PACKET CMD0_PACKET
-#define CMDV_PACKET 0x???
-
-/*==========================================================================*/
-/*==========================================================================*/
-#endif _LINUX_SBPCD_H
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov